In many locations from chemistry laboratories to industrial amenities, to be able to ensure the safety of life and property towards a possible hearth hazard, extinguishing systems are used along with detection and alarm systems. It can be extremely essential that the extinguishing methods installed could be triggered by the fire extinguishing control panel, in order to remove a possible hearth with early intervention.
In order to satisfy these needs, and with 35 years of sectoral knowledge and expertise, Mavili Elektronik presents:
Maxlogic Conventional Fire Extinguishing Control Panel operating in accordance with the cross-zone detection principle;
Maxlogic Extinguishing Status Indicator Unit, which permits the distant performance of the indications and controls on the Control Panel;
Maxlogic Extinguishing Output Expansion Panel;
Maxlogic Extinguishant Manual Release Button, which permits the extinguishing course of to be began manually and remotely; and
to make sure that the extinguishing course of can be paused, Maxlogic has produced the Extinguishant Emergency Stop Button.
All these units are produced using surface-mount expertise and are geared toward making the automation of the extinguishing system and hearth and gasoline detection system perfect.
เกจวัดแรงดันดิจิตอล : Mavili
Mavili Elektronik develops its merchandise by all the time contemplating the wants of the installation. In instances that require the combination of the extinguishing system with the clever addressable hearth detection system, it provides options by way of the monitoring modules that also have a ‘supervised’ option.
Supervised monitoring modules play an essential position in controlling the continuity of the cable connection between the loop and the extinguishing system. Failure to detect a possible open or quick circuit in the wiring between the contact monitoring modules and the peripheral techniques may cause disruption of the triggering, with doubtlessly crucial penalties. For this cause, when selecting monitoring modules, it should be taken into consideration that they have supervised options.
Image copyright: Mavili
Since Maxlogic clever addressable fire detection and alarm control panels are continuously communicating with ‘supervise’ contact monitoring modules connected to cable loops and compliant with EN 54-17 and EN 54-18 requirements, it makes it easier to observe conditions such as open circuits and short circuits which will occur in the system. Many duties may be performed within the hearth extinguishing installation, such as the management and monitoring of all valves that may interrupt the flow of water, water move alarm switches, stress swap, and electrical or diesel hearth pumps.
By including two contact monitoring modules to two separate relay outputs situated above the Maxlogic Conventional Fire Extinguishing Control Panel, one of the modules can be used to manage errors and the opposite to control the fireplace scenario, monitoring and management of the extinguishing system through an clever addressable hearth detection and alarm system can be performed successfully.
For more info, go to